AMS CMM Probing Products

REQUEST A QUOTE FOR CMM PROBES AND ACCESSORIES

Although we are manufacturer of new Measuring systems but our main focus will be always giving the customer the best value for the money. If the customer has an existing CMM, still in good mechanical shape and the size is enough to cover the customer measuring needs then we will recommend the retrofit of the existing CMM rather than buying new one.

– MH20i –

Manual indexable probe head.

Manual indexable probe head that combines the TP20 kinematic stylus module mount with two axis indexing, enabling flexible stylus changing and repeatable probe re-orientation.

The A-axis rotates through ±180° in the X-Y plane. The B-axis rotates through 90° in the Z plane. A lever locks the head in one of up to 168 repeatable positions, set at 15° increments.

The head is capable of carrying the full range of TP20 modules, which can be changed without re-qualification, providing qualification has taken place in each position with each stylus / module combination.

Length	61 mm
Diameter	48 mm
Weight	210 g
Probe mounting	TP20 kinematic mount
Head mounting	MS range of shanks
Suitable interface	PI 200-3
Number of probe sockets	1
Probe status indication	1 LED
Cable connection	5 pin DIN 180º socket
A-axis indexing	0° to 90° in 15° repeatable steps
B-axis indexing	180° in 15° repeatable steps
Repeatability of position	1.5 µm (0.00006 in) (TP20 and 10 mm stylus fitted) 2.5 µm (0.0001 in) (EM2 extended module and 10 mm stylus)
Maximum extension bar	EM2 extension module - 75 mm (2.95 in)