AMS CMM Probing Products

REQUEST A QUOTE FOR CMM PROBES AND ACCESSORIES

Although we are manufacturer of new Measuring systems but our main focus will be always giving the customer the best value for the money. If the customer has an existing CMM, still in good mechanical shape and the size is enough to cover the customer measuring needs then we will recommend the retrofit of the existing CMM rather than buying new one.

– REVO 5-axis –

A REVO® system delivers high performance scanning, non-contact inspection and surface finish analysis on a single CMM.

Multi-sensor 5-axis measurement system

  • The REVO® system uses synchronised motion and 5-axis measurement technology to minimise the dynamic effects of CMM motion at ultra high measurement speeds.

  • Controller system :

    • The 5-axis measurement technology is embedded in Renishaw's UCC S5 CMM controller which forms the basis of the 5-axis measurement system
    • 3 machine axes plus the 2 rotary axes of the head. Patented technology within the UCC S5 provides unique motion commands, synchronisation and 5-axis metrology capability.
    • In order to achieve the high scanning speeds it is essential the 5-axis measurement system has a fully integrated control loop.

  • REVO system change rack:

    • Designed to allow automatic probe and stylus holder changing on a CMM.
    • For optimum metrology, REVO probes and stylus holders should be changed automatically using REVO change ports
    • The primary purpose of the system is to improve flexibility with the ability to use and store longer styli and large star stylus configurations.

  • Faster calibration:

    • Using a table mounted sphere, the simple and practical calibration technique for REVO-2 determines the actual head and probe geometry, allowing measurement in any position from a single operation.
    • Where a CMM is Pre-Owned only for a single or limited number of parts, typically there may be 10 head orientations Pre-Owned. Calibration time for these positions may take around 30 minutes. REVO-2 requires only 20 minutes.
    • If the CMM is Pre-Owned for multiple parts, typically there may be 40 head orientations, dramatically increasing the time required for calibration to around two hours. Again, REVO-2 requires only 20 minutes.

  • 5-axis measurement techniques and applications:

    • Renishaw's 5-axis high-speed, high-accuracy measurement techniques offer a wide range of benefits resulting in significant throughput improvements.

    Focus on Accuracy and Precision.

    Phone:(281) 712-7879
    Fax:(281) 712-7860
    Email:inquiries@ams-cmm.com

    2016 © AMS - Advanced Metrology Solutions